Vibratory Truss Screeds

Filetype:

Filesize: 409609 Byte
ShareBy: Kathy
There are 422 vistors like this document,if you also like,dig it!
Click Here To Download...

Part of content:

Vibratory Truss Screeds

www.multiquip.com
Construction Starts Here
Vibratory Truss Screeds
Air and engine powered models

Vibratory Truss Screeds
MQ/Whitemans vibratory truss screed exceeds contractors
expectations for leveling pavement and industrial floors. Its
proven design has made it a favorite of concrete contractors for
over a decade.
Engine Driven Screed
n
Eccentric shaft design produces 8,000 vibration cycle nodes
per minute.
n
Ideal for slab, bridge and highway applications
n
Powered by either 7.1 HP or 9.5 HP Honda engines. Engine
kits are available factory installed on 5-foot truss sections
for reduced set up time at the job site.
n
Winch options include manual or self-propelled models. Self-
propelled models are each mounted on a 2.5-foot section of
screed.
n
Crowns/Inverts may be obtained with optional kits
SCREED CONSTRUCTION
Available in either air powered or engine-driven configurations,
this truss screed will provide dependable performance on job
after job. Its modular design gives contractors the ability to adapt
the screed to their requirements by adding or removing sections
as needed.
7.1 HP* or 9.5 HP*
Honda engine drive
Galvanized steel
blades resist rust
Turnbuckles provide
fine grade control
Manual
winches with !/8
" cable
Engine driven models use
rotating eccentric shaft
End handles with extension
facilitate handling on the slab.
Self-propelled winches minimize
labor and offer adjustable travel
speeds of 0-12 ft. per minute.
Steel Truss Design
n
Steel construction keeps the screed from riding up on stiff
concrete mix designs.
n
Top pipe manufactured from schedule 80 steel and features
16 TPI thread to provide fine grade control should crowns
or inverts be required. Crown/Invert kit may be required
depending on grade requirements.
n
Screed blades are constructed of 10-gauge galvanized steel
for rust resistance and maximum durability.

Air-Powered Screed
n
Naval bronze piston vibrators produce 9,500 vibrations per
minute
n
Vibrators are spaced at 30-inch centers for uniform
consolidation
n
Capable of striking off slabs up to 11-inches thick
(performance may vary according to mix design and job
requirements)
n
Air consumption rated at 4 CFM at 60 PSI per vibrator
n
Crowns/Inverts up to �-inch per foot are attainable without
an optional kit
Screed Accessories
A full range of accessories is available to ensure your
air- or engine-driven truss screed can meet changing job
requirements.
Naval bronze air vibrators are
rust resistant and deliver high
frequency vibration.
Air regulator and mist
lubricator keep piston vibrators
performing under optimum
conditions. (Included with
WSHAH end handle kit.)
Invert/Crown Kit Models are available for either air or engine-
driven screeds. This kit provides the greatest range of motion for
crowns or inverts in excess of �-inch per foot. Model:

Download Vibratory-Truss-Screeds.pdf

Comments

Your talk will be first one...

Hot Tags

kinematic precision anneal screw turning grinder weld assembling found coupling oxidation ceramics view racker rough